How To Draw A Dragon Face Front View

Download Article

Drawing a dragon is a great fashion to show your creativity, but it may be challenging to describe the head because it has a lot of item. Luckily, you can offset sketching the head with basic shapes before adding in the features. Fantasy dragons usually have pointier snouts and are the most common types in Western culture, while Chinese dragons have boxier heads. With a flake of practice, you lot'll be able to depict any type of dragon head y'all desire!

1
Draw a circle in the middle of your newspaper. Utilize a pencil and sketch your lines in lightly then you're able to erase them easily. Brand the circle in the center of the page, leaving room on each side of it so you lot have space to add more features. The circumvolve doesn't need to be perfectly round, but you may use a compass to help you draw your lines if you lot want.^[1]
- The cartoon of the dragon head will be in profile view when you're finished.
- If you programme on calculation the rest of the dragon's body to your drawing, then make certain the circle is modest enough then you tin fit the body on your sheet of paper.
- If you want your dragon to have a longer confront, then brand a horizontal oval instead of a circumvolve.
2
Add a rounded trapezoid on the side of your circle for the dragon's snout. Choose either the left or right side of the circle depending on which way you want the dragon head to face. Draw the top horizontal line of the snout coming from the top of the circle so information technology's the aforementioned length as the circle's diameter. Make another horizontal line coming from the bottom of the circumvolve to make the lesser of the snout. Connect the ii lines so the corners are rounded.^[2]
- Y'all tin can make the snout longer or shorter depending on how you want the dragon to look.
- Don't go out sharp corners on the finish of the snout or else your dragon won't wait natural.
Advertisement
3
Make parallel lines coming out the bottom of the circumvolve for the dragon'south cervix. Start one of the lines where the bottom of the snout connects to the head. Make a curved line coming down from the head as long as yous want it. Then describe some other curved line that's parallel to the first one on the reverse side of the head.^[3]
- The dragon's neck normally gets wider closer to its torso, so y'all can make the lines get further apart near the bottom if you want to.
Tip: Add a cervix even if yous don't program on drawing the rest of the dragon's body. That fashion, the head volition nevertheless have the illusion that it'due south continued to something.
iv
Sketch a curved horizontal line through the trapezoid to make a oral cavity. Kickoff drawing the oral cavity in the middle of the trapezoid's narrow finish. Extend the line horizontally so it ends nigh the center of the dragon's caput. Curve the end of the rima oris up if yous want your dragon to expect like it's grin, or angle it downwards if you want it to pout.^[four]
- Put a parallel line underneath the mouth if you want it to look like your dragon has a bottom lip.
5
Draw triangles coming out from the mouth to requite your dragon teeth. You tin can either add teeth that point up or down forth your dragon's mouth. Choose anywhere forth the mouth and draw a triangle that points up or down starting from the mouth line. Add together 5-6 separate teeth in your dragon's rima oris so information technology looks more fearsome.^[5]
- Don't line the unabridged mouth with teeth or else your drawing may start to look messy.
- You can have teeth pointing both upwards and down.
6
Put a circle or triangle above the oral cavity to make an heart. Place the eye next to where the elevation of the snout connects to the side of the circle. If you want your dragon to expect more realistic, draw a small circle for the middle so there's a small gap between it and the acme of the snout. For a dragon that looks angrier, add a horizontal triangle and so the indicate faces the snout.^[6]
- Don't make the center too big or else yous won't have room to add other features.
- Search for pictures of other reptiles to see what their eyes look like and then you can use them every bit a reference.
7
Add together bumps and ridges on the height of the dragon'due south head for more than texture. Dragons don't have smooth skin, so their heads volition look bumpy and knobby from their scales. Use the outlines you currently have equally guides and go over them to add curves to the snout. Use wavy or zig-zag lines going from the terminate of the snout toward the back of its head.^[7]
- For instance, y'all may add a large bump above the dragon's eye if you want to requite it a prominent forehead.
- You tin can add equally many or as few bumps and ridges to the dragon depending on how you want it to look.
8
Give your dragon horns if you want to. If you want to add horns to your dragon, brand a vertical line extending out from the top of the dragon'due south head. Extend the line out then it'southward about the aforementioned length as the snout. Add together another line that starts on the back side of the dragon's head and connects to the terminate of the starting time line to consummate the horn.^[8]
- Make the horn shorter if you want to make it seem like your dragon is younger.
- Y'all can make the horns any shape you want. Wait up horns on real animals to become influences for what you can include on your dragon.
- You may also cull to add horns or spikes running down the back of the dragon's neck if y'all want to.
9
Erase the lines you used as guides. Go over your drawing with an eraser and get rid of any lines that aren't still a part of your dragon. For case, yous may erase the circle or the original outline of the snout if you lot added more than bumps to it. Continue erasing whatsoever guides or mistakes you made, and accident off the shavings when you're finished.^[9]
- Darker lines will be harder to erase than lightly sketched lines.
- Get a clickable detail eraser if you need to erase lines in small areas. Yous can get special erasers from an art shop or online.
10
Add details like scales and nostrils to make your dragon seem realistic. Once you erase the guide lines, start adding the final details into your drawing. Beginning with modest ovals or circles for the nostrils at the end of the snout. Once you add together the nostrils, draw in U-shaped lines on the sides of the dragon's head and down its neck give the illusion of scales.^[ten]
- You lot don't need to draw every scale on the dragon'due south face up since it could make your drawing look messy or unclear.
- Shade your drawing with a pencil or colored pencil if you want to add together more than perspective or color.
11

Finished.

Ad

1
Make a circle with a rounded rectangle for the dragon's head and snout. Get-go by making a circle in the middle of your piece of newspaper so you take room to add features on each side. Choose the correct or left side of the circle to put the snout depending on what management you lot want the dragon to face. Start the rectangle halfway downward from the top of the circle and connect the lesser edge to the lowest signal of the circle.^[xi]
- You tin choose to brand the dragon's snout thicker if yous want.
- When yous're finished, your dragon head will be in profile view.
- Sketch your lines lightly at first so y'all can easily erase them later on. Otherwise, y'all'll leave marks on the newspaper that yous can't get rid of.
2
Sketch in the dragon's neck coming out from the other side of the head. Start a line at the betoken where the bottom of the snout touches the circumvolve. Curve the line slightly downwards so it looks like it extends off of the page. Describe the top of the cervix coming from the tiptop side of the circle so information technology's parallel with the first line you drew.^[12]
- While y'all don't accept to draw the neck for your dragon, information technology adds to the illusion that the head is continued to a body.
- Chinese dragons accept long, snake-like bodies, so the neck will stay the same thickness the entire fourth dimension.
three
Draw a horizontal line and triangles to give your dragon a mouth and teeth. Kickoff the line for the oral fissure and so it'southward a third of the way upward from the bottom of the rectangle. Make a slightly curved horizontal line that ends near the eye of the dragon'southward caput. Depict small triangles coming out from the top or bottom of the line to give the dragon sharp teeth.^[13]
- Give your dragon a smile if y'all want it to look happy or a frown if you want it to appear more fierce.
- Simply add a few teeth to the rima oris so the drawing doesn't look messy.
4
Add together a circumvolve or oval above the mouth for your dragon's eye. Place the eye for your dragon within the circle so it'south next to where the elevation of the snout connects to the head. Brand a circumvolve or a horizontal oval for the eye so in that location's a pocket-sized gap between it and the top of the head. Add together an angled line in a higher place the centre to give your dragon an aroused brow.^[fourteen]
- The dragon's educatee tin be round like a human, or you tin can brand it expect like a slit, similar to a snake or cat.
- Don't make the eye too large or else the dragon will look unnatural and yous won't have room to place the rest of the features.
5
Draw antlers or horns on top of your dragon'due south caput. Chinese dragons unremarkably have antlers that look like a deer, but they tin can too have standard spiked horns. If you desire to add antlers, Draw a Y-shape coming out from the dorsum of the dragon's caput. Add lines on either side of the Y-shape so the antler ends in curved points. If you want to make horns, draw a long triangle coming out from the back of the dragon'due south caput instead.^[xv]
- You don't need to add antlers or horns at all if you don't want to.
6
Sketch in ears underneath the antlers. Unlike many other dragons, Chinese dragons have ears on the sides of their head that expect similar to cow or deer ears. Draw a curved line coming out from the side of the dragon'southward head and extend it so it'southward about half every bit long as the head'due south diameter. Add another curved line underneath the offset one and connect the ends to make the ear.^[16]
- You don't need to draw the ear on the other side of the caput since you wouldn't be able to run into it from this perspective.
7
Give your dragon a beard and mane. Chinese dragons have hair and manes effectually their heads that resemble a panthera leo. Put in wavy lines that stop in points effectually the bottom of the snout and the back of the head. Draw the hair in tufts rather than adding the private strands and so your drawing doesn't get muddled.^[17]
- The mane will go backside your dragon's horns or antlers if it has them.
- You tin make the hair every bit long or brusque as y'all desire.
eight

Erase the guide lines that aren't a function of your dragon's caput. Use the eraser on your pencil or a cake eraser to clean up the lines on your cartoon. Erase any of the lines that you were using every bit guides, such every bit the sides of the circle or parts that are overlapped by hair. Continue getting rid of lines you don't need in your drawing anymore and blow the shavings off when you're done.^[18]

Warning: Don't wipe the drawing with your mitt when yous're done erasing your lines since yous could easily smudge the pencil.
9
Add nostrils and whiskers to the snout. Put in small circles or ovals near the forepart of the snout for your dragon's nostrils. Leave a small gap abreast the nostril earlier drawing a long wavy line that ends near the back of the dragon'south head. Make another parallel wavy line directly underneath the first one and connect the ends to add the whisker.^[19]
- Draw small smoke clouds coming out from the dragon's nostrils if yous desire to make information technology seem like it's about to breath fire.
- Shade your drawing with your pencil to make it wait more realistic and add together perspective.
- Utilise colored pencils if you want your dragon to await more colorful.
x

Finished.

Advertizing

Add together New Question

Question

Why would I endeavor shading the drawing rather than redoing the colour?

Shading makes the art look more than real. Redoing the color makes it look more than like a cartoon.
Question

What if this is difficult for me?

Jacquelyn Helmuth

Community Answer

Attempt sketching it lightly and use the picture of the dragon yous want to depict. Then, lightly draw what you encounter and, if you happen to become the shape y'all want, draw a little darker. With practice, you will improve.
Question

How do you make epic scenes with dragons that POP out at you?

Employ dramatic shading. For instance, if your dragon is facing slightly left, add together shading under its chin, along its neck, at the left end of its eyes, and at the base of its horns.
Question

How do I describe a dragon'due south heart?

Draw a more than rounded outline than that of a human, more like a cat's middle. Give the eye a thin, curved pupil. Add together shading to suggest a colored iris and surround the eye with scales.
Question

What would be a practiced background for a dragon?

Tokayyoshi

Community Answer

If it's a fire-breathing dragon, add flames! If your dragon lives in the ocean, draw fish, coral, and bubbling.
Question

How can I make a drawn dragon appear lifelike?

Add lots of shading, i.e., depict where the lighting would show.
Question

I could not depict these without running into a problem. Is there an easier fashion?

It depends on your level of ability. If you want simpler processes, you tin kickoff with easier dragons and build up from there.
Question

How would I describe a frill?

Frills wait like smaller versions of wings that are fastened to the head. Just look at wing references and size them down. If you need a better visual, tissues and pipe cleaners will assist you get the positioning right.
Question

Is there a simpler fashion to draw the dragon's horns?

You tin can make ii wavy lines that connect at the elevation and course a point, and if that doesn't piece of work, you can make a stretched triangle with some overlapping skin at the base of operations.
Question

How do I draw a cave for my dragon?

You can draw a cave past drawing a rocky circle and adding shading in the background, darkening every bit y'all get deeper. Try to make the cave walls uneven, and if you desire, add some hanging rocks, rocks hugging the cave wall, etc. Gray or brown would be good default colors, but you can add multiple colors if you want to include glowing jewels and gems.

See more answers

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Video

Use pictures of other animals for reference if you want to make your dragon more unique or add unique features. For example, y'all tin can give your dragon a neb like a turtle or a

Thanks for submitting a tip for review!

Things You'll Need

Paper
Pencils
Eraser
Colored pencils (optional)

Nearly This Article

Article Summary X

To draw a dragon head using shapes, starting time by cartoon 2 circles close together to make the eyes. So, depict ii wedge-like shapes for the snout, and sketch the neck using long, curvy lines, similar to the prototype of a snake. Adjacent, utilize triangles and trapezoids to shape the back of the head, and describe cones and mounds to represent parts like the horns or locks of hair. Subsequently, refine the lines and add together details such as fins and spikes. Finally, erase any unnecessary lines and color your dragon as desired. To learn more, including how to describe a dragon head using animal references like goats and crocodiles, read on.

Did this summary help y'all?

Thanks to all authors for creating a page that has been read 557,227 times.